Whoa... everyone just calm down...
take the load off, breath, sip your coffee...
its Friday

G'Day...
20°/30°C... absolutely soggy @ 70% RH, cloudy, gusty winds...


Nespresso at ze GF's...
(but not before fending off a feline attack of "FEEEED MEEEE!!!"
...)
commute bearable, road users behaving erratic though... Achtung baby!
office, dull, Nescafé the only consolation...

some imbeciles continuously left the upper cabinets open in that brake room...
located right behind the door frame I'd banged my head at least 10 times now...
Well, not anymore... leaving them always open means they're not required, hence I simply took those darn doors off...
(don't care if the Frodos of the world manage to pass underneath... I'm 6'1" and those doors were 2" too low... period...)
LaST night was productive though...
While swapping the rotors again (don't ask...
) I noted the caliper pistons on the '00 ST started getting hard to move... 
(normally you can push them in with ease in by applying two thumbs on the caliper casing...)
So brake fluid out, off with the calipers, blow gun (and wooden strips) to pop the pistons out, heating up the ultrasonic...

Always have sufficient amounts of dust-/seal-rings and float-pin grommets stashed...
Sooo smooth again...
About 2300hrs I got to ze GF's place, she was already pretty much unconscious... year, cats and women, both could sleep like 20 hours a day...

anyhooo...
... WEEKEND!!!
take the load off, breath, sip your coffee...

its Friday

G'Day...
20°/30°C... absolutely soggy @ 70% RH, cloudy, gusty winds...
Nespresso at ze GF's...

(but not before fending off a feline attack of "FEEEED MEEEE!!!"
commute bearable, road users behaving erratic though... Achtung baby!

office, dull, Nescafé the only consolation...


some imbeciles continuously left the upper cabinets open in that brake room...
located right behind the door frame I'd banged my head at least 10 times now...
Well, not anymore... leaving them always open means they're not required, hence I simply took those darn doors off...

(don't care if the Frodos of the world manage to pass underneath... I'm 6'1" and those doors were 2" too low... period...)
LaST night was productive though...
While swapping the rotors again (don't ask...

(normally you can push them in with ease in by applying two thumbs on the caliper casing...)
So brake fluid out, off with the calipers, blow gun (and wooden strips) to pop the pistons out, heating up the ultrasonic...
Always have sufficient amounts of dust-/seal-rings and float-pin grommets stashed...
Sooo smooth again...
About 2300hrs I got to ze GF's place, she was already pretty much unconscious... year, cats and women, both could sleep like 20 hours a day...
anyhooo...
... WEEKEND!!!


, have a great day on the roads! 