SteveST1300
Vendor
That is correct Skip I might play with a slit or I might just leave it but there is no interference from the Deflector and the mirror has full movement.
ST1300 Under mirror auxiliary light bracket
- Thread starter SoCalST8
- Start date
That is correct Skip I might play with a slit or I might just leave it but there is no interference from the Deflector and the mirror has full movement.
how are you guys mounting the on/off switches for all the lights you have? I want to do something similar but not a big wiring mess!
Thanks!
Thanks!
Why did it take me this long to find this thread?
Cannot have enough forward hazard lights for traffic escorts.
(Left some questions regarding the product over at the vendors thread)
Cannot have enough forward hazard lights for traffic escorts.
(Left some questions regarding the product over at the vendors thread)
Last edited:
ok, being new to the bike and all... how do you get the mirrors off to mount these? I just got a set and well hopefully I don't have to disassemble the front end! And, hopefully someone has a quick answer !
You mean they don’t come with instructions or a video?
I dont have a set, infact im waiting for answers to my questions, but I think thee installation can be summed up as:
1. Remove the mirror farings. They are designed to pop off when bumped into (mirror strikes). They are held in place with 3 male/female spring metal sockets. Just pop them on the mirror side with the palm of your hand, or pull them away from the bike. There should be a plastic keeper that prevents them from falling to the ground.
2. There’s a mounting bolt (see pic below) below the mirror. Use that as oriented in the picture (which is in the OP).
3. Attach your light module/pod and wire it up, and test it. Repeat for other side.
4. Replace the mirror farings.
I dont have a set, infact im waiting for answers to my questions, but I think thee installation can be summed up as:
1. Remove the mirror farings. They are designed to pop off when bumped into (mirror strikes). They are held in place with 3 male/female spring metal sockets. Just pop them on the mirror side with the palm of your hand, or pull them away from the bike. There should be a plastic keeper that prevents them from falling to the ground.
2. There’s a mounting bolt (see pic below) below the mirror. Use that as oriented in the picture (which is in the OP).
3. Attach your light module/pod and wire it up, and test it. Repeat for other side.
4. Replace the mirror farings.
Thanks! Makes me nervous to pop on them but I will try it! Thanks for the fast response.
Well, that worked perfectly and my nerves survived!! Thanks again.
Now I have to get some nice lights to go on them.
Now I have to get some nice lights to go on them.
90210brandon
Be a Zero
oops. Sorry Dave. I ordered a set but I forgot to mentioned this.
90210brandon
Be a Zero
SOCAL (Charlie) - Where did you get these lights from? Amazon? I really like the look. How well do they work?
Last edited:
skipcurt
Skip
I'm not sure what I'm doing wrong but I can't get these things in there. I've got the fairing deflectors also. Is that the issue?
Skip
Skip
skipcurt
Skip
So with the help of Steve above by phone I was able to get them mounted but I don't have the clearance for full mirror movement and does not hit the correct viewing angle for me. Anyone have the same issue and remove any material?
I've sent Charlie (SoCal ST8) a PM yesterday afternoon but haven't heard back from him yet?
Skip
I've sent Charlie (SoCal ST8) a PM yesterday afternoon but haven't heard back from him yet?
Skip
OP
OP
SoCalST8
Vendor
The brackets were designed very close the the mirror cover and would not work with deflectors installed.
OP
OP
SoCalST8
Vendor
They used to be available on Amazon but has since been replaced with newer styles. Search Amazon for LED driving lights. Should be around $25 a pair.
SOCAL (Charlie) - Where did you get these lights from? Amazon? I really like the look. How well do they work?
Dave.David
Rider
OP
OP
SoCalST8
Vendor
Update: Recommended light unit of 1lb or lighter on PSR auxiliary brackets. (heavier light units will cause brackets vibrating excessively and should not be used)
below units has been tested to work excellent with the brackets:
$19.99 WEISIJI LED Motorcycle Driving Lights 20W Reflected Lens Led Truck Lights Heavy Duty LED Work Light(2PCS / Pack)
https://www.amazon.com/dp/B01MU0JH5P/ref=cm_sw_em_r_mt_dp_U_kQJwCbDWWQV5C
$18.99 JAHURD Light [2 Pack] 3" inch 18W Flood LED Pods LED Work Lights Driving Fog Lights for Off-road, Truck, Car, ATV, SUV, Jeep
https://www.amazon.com/dp/B06XW4P7N2/ref=cm_sw_em_r_mt_dp_U_SQJwCbQEKD6EQ
below units has been tested to work excellent with the brackets:
$19.99 WEISIJI LED Motorcycle Driving Lights 20W Reflected Lens Led Truck Lights Heavy Duty LED Work Light(2PCS / Pack)
https://www.amazon.com/dp/B01MU0JH5P/ref=cm_sw_em_r_mt_dp_U_kQJwCbDWWQV5C
$18.99 JAHURD Light [2 Pack] 3" inch 18W Flood LED Pods LED Work Lights Driving Fog Lights for Off-road, Truck, Car, ATV, SUV, Jeep
https://www.amazon.com/dp/B06XW4P7N2/ref=cm_sw_em_r_mt_dp_U_SQJwCbQEKD6EQ
Last edited:
Is there anyway to buy these brackets??
I was thinking for speakers?
I was thinking for speakers?
OP
OP
SoCalST8
Vendor
