Hey thanks Scooter, that did the trick. Figured it had to be easy and it was easy-peasey. I had a wad of keys with box keys and they hindered opening the handle enough to unlatch it. You da man...thanks again.
Show me your Top Box!
- Thread starter IlliniST
- Start date
- Joined
- Nov 20, 2005
- Messages
- 9,521
- Location
- Cedar City, Utah
- Bike
- 12/04 ST 1300s
- 2024 Miles
- 000420
- STOC #
- 5901
Old thread, I might be in it earlier, but here it goes my latest!
The Blue ones: 2010 & 2004#2 :
and another blue one in storage 
The Black ones:
(On 04#2 now) and recently bought for the 2012: 
The Red one on the 05 that I sold to my son back in 2013:
I also have a silver one that is in storage.
The Blue ones: 2010 & 2004#2 :
and another blue one in storage The Black ones:
(On 04#2 now) and recently bought for the 2012: The Red one on the 05 that I sold to my son back in 2013:
I also have a silver one that is in storage.
Is this a Hondaline topbox? I want this for my 2006 ST1300!!
- Joined
- Nov 20, 2005
- Messages
- 9,521
- Location
- Cedar City, Utah
- Bike
- 12/04 ST 1300s
- 2024 Miles
- 000420
- STOC #
- 5901
Well, just over a week ago, you could have owned it! But I doubt if you would have wanted to pay the price!
I just paid $495 + shipping (which wasn't cheap)
4:I hope the photos load, otherwise this may just be a rambling entry.
About six years ago I moved my top box forward to get a better center of gravity, better air flow, and use it as my backrest. It turned out to be a little high and was actually uncomfortable for where the pad hit my back. I moved it back about three inches and built a backrest that is adjustable and a little lower for better lumbar support. The backrest attaches to the frame supporting the top box and everything can be removed in about two minutes to have room for a passenger with the top box in its original position. The top box carries a Harbor Freight waterproof box on a plastic platform made from a cutting board from WalMart. I milled holes for bungee attachments and for the waterproof box with some spools on the box bottom and a 1/4" bolt to keep it in place. At one time I used a tank bag for the misc. items (camera, glasses, SPF, etc.) but it was a bit of a hassle every time I left the bike alone while it was parked. The plastic holder on the tank for the maps covers a larger map area than the bag did and it is less of a temptation for the snatch-and-run crook. The top box platform attachment mirrors the original placement grooves and holes so it clamps in place just like it was made to do. All of the framing was made with pieces of aluminum that I had found in second hand stores and when Sears was closing its hardware store. "Someday" I'll go back and clean up the rough assembly.
About six years ago I moved my top box forward to get a better center of gravity, better air flow, and use it as my backrest. It turned out to be a little high and was actually uncomfortable for where the pad hit my back. I moved it back about three inches and built a backrest that is adjustable and a little lower for better lumbar support. The backrest attaches to the frame supporting the top box and everything can be removed in about two minutes to have room for a passenger with the top box in its original position. The top box carries a Harbor Freight waterproof box on a plastic platform made from a cutting board from WalMart. I milled holes for bungee attachments and for the waterproof box with some spools on the box bottom and a 1/4" bolt to keep it in place. At one time I used a tank bag for the misc. items (camera, glasses, SPF, etc.) but it was a bit of a hassle every time I left the bike alone while it was parked. The plastic holder on the tank for the maps covers a larger map area than the bag did and it is less of a temptation for the snatch-and-run crook. The top box platform attachment mirrors the original placement grooves and holes so it clamps in place just like it was made to do. All of the framing was made with pieces of aluminum that I had found in second hand stores and when Sears was closing its hardware store. "Someday" I'll go back and clean up the rough assembly.
- Joined
- Nov 20, 2005
- Messages
- 9,521
- Location
- Cedar City, Utah
- Bike
- 12/04 ST 1300s
- 2024 Miles
- 000420
- STOC #
- 5901
Interesting!I hope the photos load, otherwise this may just be a rambling entry.
About six years ago I moved my top box forward to get a better center of gravity, better air flow, and use it as my backrest. It turned out to be a little high and was actually uncomfortable for where the pad hit my back. I moved it back about three inches and built a backrest that is adjustable and a little lower for better lumbar support. The backrest attaches to the frame supporting the top box and everything can be removed in about two minutes to have room for a passenger with the top box in its original position. The top box carries a Harbor Freight waterproof box on a plastic platform made from a cutting board from WalMart. I milled holes for bungee attachments and for the waterproof box with some spools on the box bottom and a 1/4" bolt to keep it in place. At one time I used a tank bag for the misc. items (camera, glasses, SPF, etc.) but it was a bit of a hassle every time I left the bike alone while it was parked. The plastic holder on the tank for the maps covers a larger map area than the bag did and it is less of a temptation for the snatch-and-run crook. The top box platform attachment mirrors the original placement grooves and holes so it clamps in place just like it was made to do. All of the framing was made with pieces of aluminum that I had found in second hand stores and when Sears was closing its hardware store. "Someday" I'll go back and clean up the rough assembly.
It's amazing what folks here come up with!
That looks pretty nice for 'rough' assembly! Great fab work!
Happy Rob
Rob
- Joined
- Jun 17, 2015
- Messages
- 197
- Age
- 55
- Location
- CBS, Newfoundland, Canada
- Bike
- 2004 ST 1300
- STOC #
- 8931
I am looking for a blue top box for my new "Blue Streak". Learned last evening that BESTEM no longer makes topboxes???? Got a reply from the company.
Guess I am going to have to pay $500 for a GIVI? Anyone who has a lead for me, please chime in. Used or new.
Guess I am going to have to pay $500 for a GIVI? Anyone who has a lead for me, please chime in. Used or new.
Oh my! I love my Bestem 929, so I saw this post and immediately went to my source on Amazon and "no longer available" That hurts! I should have bought more of them. This is recent as my Father in Law was just able to grab one.
Shad mades some good top boxes at reasonable prices vs Givi.
Happy Rob
Rob
- Joined
- Jun 17, 2015
- Messages
- 197
- Age
- 55
- Location
- CBS, Newfoundland, Canada
- Bike
- 2004 ST 1300
- STOC #
- 8931
Just reading the posts about the SHAD SH58X. expandable. Problem is trying to get the damn thing to Canada.
Wow, so now I own a collectible item??
Too bad, they were a good value, no complaints on mine. Color matches better than it looks in photos for whatever reason(s). Seldom mount it unless the wife is passenger.
Sounds like a road trip!!! Heading 180 degrees Woohoo!
Have you looked at the SHAD offerings? The 58 (?) expandable model is pretty nice looking.
Rob, I just came across and box on Amazon that looks like a Bestem with a Bestem price and available to us north folk.
https://www.amazon.ca/dp/B00QLSL0YA/ref=dra_a_ms_hp_ho_xx_P1500_1000?tag=dradisplay0c-20&ascsubtag=db8db94666a4377d5b2cffeaacf05e5a_S&th=1
Yep road trip time. Not only that— install it while south of the border and ride back loaded with fruit and alcohol.Happy Rob said:
Here's the Comie 48L trunk I just put on my ST1100. $52 on Amazon. You can find details in a detailed post in the trunk/luggage forum.
- Joined
- Feb 20, 2018
- Messages
- 100
- Location
- Stratford, Camden County, NJ
- Bike
- 2010 ST1300 AA
- STOC #
- 8989
https://www.yoycart.com/Product/538062803097/
I installed one of these, this past spring. I bought it from Amazon BEFORE I found it cheaper......
I installed one of these, this past spring. I bought it from Amazon BEFORE I found it cheaper......
Attachments
Happy Rob
Rob
- Joined
- Jun 17, 2015
- Messages
- 197
- Age
- 55
- Location
- CBS, Newfoundland, Canada
- Bike
- 2004 ST 1300
- STOC #
- 8931
I am in Newfoundland, Canada. I purchased proper pan European trunk for my St1300. I can not find a new or used trunk mount ANYWHERE! been trying for months. Can anyone help? Nothing on e Bay and the European bike shops that are on line say they can not supply.
I am told that a mount from Honda Ctx 1300 may fit, but no one can confirm that?
Where can I buy mount only? Model number I have is 08L42-MCS-800 or
08L42-MCS-80212 is the main part.
I am told that a mount from Honda Ctx 1300 may fit, but no one can confirm that?
Where can I buy mount only? Model number I have is 08L42-MCS-800 or
08L42-MCS-80212 is the main part.
That's a very good top box for the money.Here's the Comie 48L trunk I just put on my ST1100. $52 on Amazon. You can find details in a detailed post in the trunk/luggage forum.