Are these aftermarket?

[Luftmeister]

I'm surprised at how much this bike scrapes the pegs and then I took a closer look. This doesn't look factory.

I'm selling the bike, and a guy who had one previously noticed them.

The person who owned it before me was about 6'3" and maybe he did it for leg room? It's doesn't look like a LOT but I'd like to know your thoughts.

Am I right or am I wrong? Do they scrape a lot?

Best,

Jim

 

[drrod]

Yes, those are aftermarket. Stock pegs stick straight out from mounting point.

 

[motornut]

I am sure you can take the pins out and move the pegs up and in to the original position. All the OEM parts are still there. That should keep them tighter to the frame and higher. Then you just drag the outside of your shoes first

 

[Andrew Shadow]

Just an F.Y.I. if you are thinking of selling them. Those are MCL (Motorcycle Larry) non-adjustable rider foot peg lowering brackets. You can probably sell them easily as they are no longer being manufactured and they are more sought after than the adjustable ones.

 

[St-Gerard]

If you do decide to sell, I would be interested in purchasing them as I have a 35 inch inseam , very long legs.

 

[Larry Fine]

Then you just drag the outside of your shoes first

My toes rub first with stock pegs because my long legs angle them downward.

 

[Luftmeister]

Just an F.Y.I. if you are thinking of selling them. Those are MCL (Motorcycle Larry) non-adjustable rider foot peg lowering brackets. You can probably sell them easily as they are no longer being manufactured and they are more sought after than the adjustable ones.

Hi Andrew,

Here they are. PM me what you think is fair + shipping from Madison, WI

 

[Andrew Shadow]

I was not asking to purchase them as I don't need them. You were questioning whether or not they were factory equipment. I was letting you know that they are not. I was also letting you know what they are so that you would know what you have if you chose to post them for sale.

@St-Gerard asked for them first, he has dibs.

 

[Luftmeister]

@Andrew Shadow sorry about that, clicked wrong thing.

@St-Gerard let me know...

 

[St-Gerard]

Hopefully, someone may know if they will fit on a 96 ,ST1100 , your bike is a 1300 correct.

 

[Luftmeister]

Hopefully, someone may know if they will fit on a 96 ,ST1100 , your bike is a 1300 correct.

Yes it is. I would think they would, based on the photo I posted which wasn't very good, do they look the same?

 

[Andrew Shadow]

The driver foot pegs are the same P/N for the 1100 and the 1300 so the brackets should fit the 1100. Hopefully someone will confirm.

 

[St-Gerard]

Yes it is. I would think they would, based on the photo I posted which wasn't very good, do they look the same?

Will go take a good look at my bike in the morning,11:00 pm ,past bed time, and me tried from working on my bike hauling trailer and cleaning house for Mother's Day. Talk soon.