Can rear wheel splines be repaired?

[ST Gui]

Main casing and gear ratio/gear set differ...

Is it known how this would affect the performance/milage of an 1100? Not that I'd bother with a swap but say it worked for a 1300. If the final drive included a "taller" 5th I'd call it a win. Well unless it made 1st "taller" as well.

I've felt the ST and some other Hondas I've had would benefit from a 6th gear. I blame my 750 Duc loping along at freeway speeds and lower RPM than any Honda I've owned for spoiling me. My '85 V65 Sabre did come sort of close though.

 

[STStew]

Some parts are...
Main casing and gear ratio/gear set differ...

http://[URL]https://www.cmsnl.com/e...00-y-austria_model4835/partslist/F__1600.html

[/URL]

http://[URL]https://www.cmsnl.com/e...ct-sales-kph_model3294/partslist/F__1700.html

[/URL]

Thanks very much! I'll have to bookmark that site for future reference.
I wonder if the GL1500 final would mount up to the ST. Many things are similar between the two images. It's really nice that we can share the drive plate.

 

[Uncle Phil]

Thanks very much! I'll have to bookmark that site for future reference.
I wonder if the GL1500 final would mount up to the ST. Many things are similar between the two images. It's really nice that we can share the drive plate.

It has been done by folks who wanted to run a car tire on the back of a ST1100, but there is some machining spacers and such to get it to work.

 

[dwalby]

If the final drive included a "taller" 5th I'd call it a win. Well unless it made 1st "taller" as well.

final drive affects all gears equally, so taller 5th means taller 1st, 2nd, 3rd, 4th as well.

 

[Dale_I]

I've got a 2001 ST1100 I'm considering parting out if you need one. Just FYI.